• M-VIEW MONITOR WALLS

    QUOTE GENERATOR: REQUEST A PRICE QUOTE

  • M-VIEW MONITOR WALLS

    FREE DESIGN SERVICE: LET WINSTED DESIGN THE PERFECT CONSOLE FOR YOU

  • M-VIEW MONITOR WALLS

    WELS4: THE MOST ADVANCED CONSOLE DESIGN SOFTWARE IS HERE!

  • M-VIEW MONITOR WALLS

    FREE DESIGN SERVICE: LET WINSTED DESIGN THE PERFECT CONSOLE FOR YOU

M-VIEW M-VIEW M-VIEW M-VIEW

flexible, expandable and completely modular

WINSTED'S NEW STOCK M-VIEW is an extruded aluminum monitor wall that is flexible, expandable and completely modular. Our proprietary patent-pending, quick-release bracket makes adjusting and reconfiguring your control room monitors fast and easy. The M-View stock monitor wall is fabricated from light-weight, high-strength extruded aluminum with a black anodized finish. The monitor wall can support any size flat-panel monitor and can be configured as an in-line, concave or convex mounting solution.

FEATURES & ACCESSORIES

Features and Accessories

WINSTED RESOURCES

EASY ACCESS TO WINSTED RESOURCES

M-VIEW MONITOR WALLS


 

1. GENERAL DESCRIPTION

1.1 The contractor shall supply a custom manufactured or stock modular monitor wall capable of supporting the monitors.
1.2 The system shall be comprised of exterior frames and interior supports fabricated from lightweight, high-strength extruded “T-slotted” aluminum with black anodized finish. Stock monitor walls shall feature a quick release adjustable bracket.

1.3 The system shall also feature the necessary pivot and/or tilt mounts required to support and/or 

adjust the specified monitors.


2. STANDARD


2.1 The system’s exterior frame and interior supports shall deliver a Rockwell hardness rating of approximately E-88.
2.2 All system extrusions shall conform to DIN 17 615 specifications.


3. DRAWINGS

3.1 The contractor shall supply five sets of scaled drawings for each console assembly showing the location of all specified electronics in isometric, plan (top), and front views.
3.2 The specification of sizes and dimensions shown in the drawings shall have a tolerance of not more than +/- 0.062” (1.6mm).

 

4. MODULAR PRE-ENGINEERED CONSTRUCTION
All components within the system shall be:

4.1 Of a pre-engineered modular construction, i.e.: constructed from a series of independent sectional compartments.
4.2 Available from a pre-defined set of manufacturers model numbers.

4.3 Free from alterations to the design either prior to or following installation, will be accomplished without the need for either welding or carpentry work.

4.4 Exterior frames and internal supports shall be constructed of anodized aluminum.

 

5. SELF SUPPORTING SKELETON FRAMEWORK 
The self-supporting skeleton framework shall:
5.1 Consist of exterior frames (1-1/2” x 3”) and interior supports (1-1/2” x 1-1/2”) constructed of black anodized 6105-T5 extruded aluminum.

5.2 Have a minimum yield strength of 35,000 lbs./sq. in.

5.3 Have a minimum tensile strength of 38,000 lbs./sq. in.

5.4 Have a twist per foot not to exceed 0.25 degrees and a total twist over 20 feet not to exceed 1.5 degrees.

5.5 Have a flatness of 0.004 per inch of width.

5.6 Have a straightness of 0.0125” per foot of length, not to exceed 0.120” over 20 feet of length.

5.7 Feature “T” shaped legs that may be mounted to the floor for added stability.

 

6. MONITOR MOUNTS

6.1 VESA Mount:

Depth from Wall: 2.94” (74 mm)
Dimensions (HxWxD): 7.25” x 4.69” x 2.94” (184 x 119 x 74 mm)
Tilt: +/15º
Pivot: 180º (depends on equipment size)
Color: Black
Weight Capacity: 40 lbs (18.2kg)
VESA Compatibility: All standard interface sizes
Typical Screen Size: 10”-32”

6.2 Large LCD/Plasma Mount:

Dimensions (HxWxD): 13.2” x 34” x 2” (335 x 864 x 51mm)
Tilt: Control from 0-15º
Mounts to: 12”-34” Stud Spacing
Color: Black
Weight Capacity: 200 lbs (90.71kg)
Typical Screen Size: 37”-63”
Compatibility: Winsted will provide the proper mount based on model number
 

7. FINISH AND COLOR

7.1 All exterior frames and interior supports shall feature a smooth black anodized finish.


8. OPTIONAL ACCESSORIES

8.1 A full range of optional accessories shall be available, such as multi-outlet power strips, wire ducts, CPU cabinet with locking door, and custom laminate filler panels.
 

9. MOUNTING HARDWARE

9.1 All hardware needed for monitor wall assembly and monitor mounts will be provided.
 

10. INSTRUCTIONS

10.1 Fully detailed assembly instructions in the English language shall be supplied with both written and pictorial descriptions for each item/model numbered component.
 

11. PACKAGING

11.1 Each component part number shall be independently marked and packed into double or triple ply corrugated outer cartons and shall be suitable for storage and shipping to site without damage.
 

12. WARRANTY

12.1 A lifetime warranty on all fixed steel structure frame components.
12.2 A ten year warranty on adjustable, sliding or hinged components as well as Corian, Comfort Edge, Laminated and Marmoleum surfaces.

12.3 A five year warranty on TruForm and Endurance Edge surfaces.

12.4 A two year warranty on all electrical components and chairs.

 

M-VIEW TECH DRAWINGS